16 other products in the same category:
![1/4” Digital Air Flow Gauge [w/ Locking Adjustment Valve]](https://kebco.co/3497-home_default/14-digital-air-flow-gauge-w-locking-adjustment-valve-.jpg)
1/4 inch digital air flow meter - locking adjustment valve.
![Gasket - 1Qt - Bottom Feed [10 pack | For 2095 Only]](https://kebco.co/3585-home_default/gasket-1qt-bottom-feed-10-pack-for-2095-only-.jpg)
The gaskets are designed to prevent leaks and will wear out, so it is best to have some on hand.
Plastic viscosity cup for checking fluid before spraying.
![Pressure Tubes w/ Check Valve - Bottom Feed [5 pack]](https://kebco.co/3578-home_default/pressure-tubes-w-check-valve-bottom-feed-5-pack-.jpg)
Pressure tubes with one-way check valve installed to prevent paint from entering the spray gun from the cup.
![Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]](https://kebco.co/3584-home_default/diaphragm-1qt-bottom-feed-3-pack-for-2095-only-.jpg)
This set of 3 plastic diaphragms is for the Fuji 2095 quart cup assembly, which prevents paint from entering the pressure tube.
![Pressure Tubes w/ Check Valve - 250cc - Bottom Feed [5 Pack]](https://kebco.co/3576-home_default/pressure-tubes-w-check-valve-250cc-bottom-feed-5-pack-.jpg)
Pressure hoses with one-way check valve installed to prevent paint from entering the spray gun from the cup
![G-XPC - Needle Packing [2 pack], 8007-2](https://kebco.co/6010-home_default/g-xpc-needle-packing-2-pack-8007-2.jpg)
![Stak Rack [12 pack]](https://kebco.co/3767-home_default/stak-rack-12-pack-.jpg)
Stak Rack is a 4-in-1 painting tool that allows you to mortise and paint interior/exterior doors, trim and kitchen cabinet doors with ease.
![Strainers - Stainless Steel Mesh - Nylon Gravity Feed Barrel [10 pack]](https://kebco.co/3488-home_default/strainers-stainless-steel-mesh-nylon-gravity-feed-barrel-10-pack-.jpg)
The Gravity Feed Stainless-Steel Mesh Barrel Strainer are designed with plastic construction and a stainless-steel mesh that filters out contaminants in your paint.
Viewed products
Preguntas frecuentes
The 9604 touch-up spray gun is suitable for a wide range of products, including water-based and solvent-based paints. Ensure that the product is compatible with the spray system for optimal results.
To clean the 9604 touch-up spray gun, disassemble the parts and rinse them with the appropriate solvent. Be sure to clean the nozzle and filter to prevent clogs in future uses.
The 9604 touch-up spray gun is specifically designed for use with FUJI products. However, it may work with other brands as long as they are compatible with the connection system and working pressure.
The recommended working pressure for the 9604 touch-up spray gun is between 20 and 30 PSI. Adjusting the pressure within this range ensures optimal performance and a uniform finish.
FUJI offers a one-year limited warranty for the 9604 touch-up spray gun, covering manufacturing defects. It is important to keep the purchase receipt to validate the warranty.
Tap to zoom
