![Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]](https://kebco.co/3584-medium_default/diaphragm-1qt-bottom-feed-3-pack-for-2095-only-.jpg "Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]")
![Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]](https://kebco.co/3584-home_default/diaphragm-1qt-bottom-feed-3-pack-for-2095-only-.jpg)
Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]
2096-3
This set of 3 plastic diaphragms is for the Fuji 2095 quart cup assembly, which prevents paint from entering the pressure tube.
16 other products in the same category:
This 2Qt. Pressure Pot Assembly Kit has everything you need to add additional material capacity using your 4-stage Fuji Spray HVLP System.
![Pressure Tubes w/ Check Valve - Long - Gravity Feed [5 pack]](https://kebco.co/3575-home_default/pressure-tubes-w-check-valve-long-gravity-feed-5-pack-.jpg)
Pressure tubes with check valve to prevent paint from entering the spray gun from the cup.
![Spray Gun Cleaning Kit [19pc w/ Lubricant]](https://kebco.co/3487-home_default/spray-gun-cleaning-kit-19pc-w-lubricant-.jpg)
This complete 19pc spray gun cleaning & maintenance kit with lubricant is designed for all types of spray guns.
![Press Tubes w/ Check Valve [3 pack - For 2Qt Pressure Pot]](https://kebco.co/5910-home_default/press-tubes-w-check-valve-3-pack-for-2qt-pressure-pot-.jpg)
Extra 3 pack pressure tube with check valve for 2 Qt. Pressure Pot.
Mini cup set for bottom feed spray gun or paint storage use.
![Air Connector Assembly [For 2Qt Pressure Pot],5401](https://kebco.co/6000-home_default/air-connector-assembly-for-2qt-pressure-pot-5401.jpg)
![Pot [For 2 Qt. Pressure Pot]](https://kebco.co/3903-home_default/pot-for-2-qt-pressure-pot-.jpg)
![Strainers - 1Qt - Bottom Feed [5 pack | For 2042 Only]](https://kebco.co/3891-home_default/strainers-1qt-bottom-feed-5-pack-for-2042-only-.jpg)
Preguntas frecuentes
The diaphragm 2096-3 is compatible with a wide range of paints, including water-based and solvent-based paints. However, it is advisable to avoid extremely viscous paints that may clog the system.
Installing the diaphragm is straightforward. First, remove the cup lid, then place the diaphragm in position, ensuring it is properly aligned. Finally, replace the lid and tighten securely.
The 2096-3 package includes three plastic diaphragms, providing spare parts for prolonged and efficient use of your Fuji 2095 gun.
The 2096-3 diaphragm is designed for single use. However, if used properly and cleaned after each use, it can last longer before needing replacement.
The 2096-3 diaphragm package has a total weight of 0.03 kg, making it lightweight and easy to handle during installation and storage.
Tap to zoom
![Diaphragm - 1Qt - Bottom Feed [3 pack | For 2095 Only]](https://kebco.co/3584-large_default/diaphragm-1qt-bottom-feed-3-pack-for-2095-only-.jpg)